ncludes the new switch mode continuous power supply.
This unit supplies high current 40 amps output in a light weight compact size case. It is suitable for a variety of uses including Selective Area Electroplating. In addition the variable output from 0 - 24 volts can be selected to suit the plating application from pre-treatment to copper or nickel plating.
Features:
- 40amp current output
- High efficiency
- Adjustable voltage 0 - 16 volts
- Light weight small size
- Overload and temperature protection
- Internal fan allows for continuous use
- Metal housing
- Digital instruments for ease of reading
The Zinidal will give a coverage of 230 sq inches at a thickness of 0.001" (1 thou) also when applied directly to steel will not cause a chemical reaction.The Nickel will give a coverage of 250 sq inches at 0.001" and is also used as a bond coat under other metals
- 1 x Switch mode Power Supply as above
- 1 x anode kit comprising:
- o 2 x 2 metres connecting wires (red & black)
- o 7 x Fine Carbon Brush Plating anodes & tough Fabric bonnets
- 500 mils Zinidal Brush Plating solution 230 sq inches coverage This special solution is a chrome look alike and with polishing will give an invisible repair.
- 500 mils Nickel Brush Plating solution 250 sq inches coverage
- 500 mils Cleaning and deoxidising Brush Plating solution
- 500 mils Etch/activator No. 3 Brush Plating solution
- 500 mils Etch/activator No. 4 Brush Plating solution
- 500 mils SO1 Chrome activator
- Complete Instruction Manual specifically for Hydraulic Ram repairs
- 24/7 support and there are very few questions that I have not already solved and can help you solveincludes